DHI-ISC-D106

Walk-through Metal Detector

> Minimum detect target: One CNY coin
> 3.5 inch LCD with an interactive, user-friendly interface
> Monitor and display the real-time signal strength of environmental interference
> Automatically searches operating frequency (20 levels available)
> Counting passing number, pass/return numbers, and alarm number
> Pass/Return statistics, alarm statistics, and searching by day
> Easy-to-install modular design
> Safe low-voltage design
> Reliable and stable aviation connector
> 9 alarm tones with 10 adjustable volume levels, mute mode and alarm duration: 0–10 s
> 255 adjustable sensitivity levels
> Separate parameter configuration for 12 supported scenarios
> IR remote controller
> Multiple IR detection modes
> Supports lead-acid batteries (optional)
Category:

Description

Technical

Precise Positioning

6 overlapping detection zones, bilateral transmission and receipt of detection signals; 2-panel indicator lights

Zone Indication

6 independent zones, and multiple metal items can be located simultaneously

IR Sensor

Infrared sensor can reduce false alarms; automatic alarm statistics and pass/return statistics

Adjustable Sensitivity

255 adjustable sensitivity levels in each detection zone (sensitivity increases by levels)

Remote Control

Comes with a infrared remote controller with the maximum remote control range of 2 m (6.56 ft)

Leakage Current

< 0.5 mA, complying with safety requirements for electronic devices

Regular

Operating Voltage

12 V DC, power adapter (included): 100 V–240 V AC, 50/60 Hz

Maximum Power Consumption

11 W

Typical Power Consumption

7.8 W

Gross Weight

47 kg (103.62 lb)

Net Weight

37.5 kg (82.67 lb)

Passageway Interior Size

2003 mm x 720 mm x 393 mm (87.0″ × 28.3″ × 15.5″)

Overall Exterior Size

Bare: 2208 mm × 866 mm × 488 mm (86.93″ × 34.09″ × 19.21″)

Packing Size

2271 mm × 695 mm × 215 mm (89.41″ × 27.36″ × 8.46″)

Operating Temperature

–20 °C to +65 °C (–4 °F to +149 °F)

Operating Humidity

0%–95% (RH), non-condensing

Storage Temperature/Humidity

–20 °C to +65 °C (–4 °F to +149 °F)/0%–95% (RH), non-condensing

Power Button

Power switch on both door panels, and metal detection power switch on the front panel

Indicator Light

One green indicator

Environmental Noise

Monitors and displays real-time signal strength of environmental interferences

Installation

Vertical mounting

Certifications

Certifications

GB15210-2018
IEC 60068-2-1
IEC 60068-2-2
CE-LVD: EN62368-1
CE-EMC: Electromagnetic Compatibility Directive
2014/30/EU
FCC: 47 CFR FCC Part 15, Subpart B

Ports

Power Output

12 V DC

Reviews

There are no reviews yet.

Be the first to review “DHI-ISC-D106”

Your email address will not be published. Required fields are marked *